Trailer Hitch Receiver That Matches 2024 Kia Telluride SX Prestige X-Pro 5,500 lb Towing Capacity

Question

Question:

I have a 2024 Kia Telluride Prestige SX Pro with a 5,500 lb towing capacity. Looking at your CURT hitch, the highest towable weight is 5,000 lb. Is this correct? If so, is there another hitch you can recommend which meets the 5,500 lb towing capacity? Thank You!

asked by: John L

0

Expert Reply:

The Curt Hitch # C13420 can actually handle 5,500 lbs as long as you use a weight distribution hitch. However, the rating of 5,000 lbs without one is the best you will find. With a WDH installed the capacity gets bumped up to 6,000 lbs so you would be able to utilize the full towing capacity of your 2024 Kia Telluride SX Prestige X-Pro.

I'm not sure if you're planning on towing the maximum amount, or if you just want a hitch that matches, but if you're towing that much with your Telluride you will want to use a weight distribution hitch regardless of the hitch requirements. In general, you want to use weight distribution if your trailer weight is more than 50% of your gross vehicle weight and at 5,500 lbs it is closer to 100%.

In addition to the hitch you will also need wiring. The Curt Powered Tail Light Converter # C59236 will allow you to add a 4-way to power your trailer's signal lights. I also checked the manual for your Telluride and found that the maximum trailer weight is 1,650 lbs without trailer brakes, and with trailer brakes you get the 5,500 lb capacity. This means you will also need to install the # ETBC7 for a 7-way.

The other thing you need to use trailer brakes is a brake controller. For that I recommend the Redarc Tow-Pro Liberty Brake Controller # RED52VR. The main unit mounts behind the dash so only the control knob is visible in the cab of your vehicle. This gives it a nice sleek look that won't take up any additional space. The knob controls the braking power and also acts as the manual override.

For a ball mount, check out the etrailer Ball Mount Kit # 989900. This kit has two ball mounts, one with a 3/4" rise or 2" drop and the other with a 2-3/4" rise or 4" drop. It also comes with a 1-7/8" and 2" ball, as well as a ball mount bag to store everything in.

I have attached some installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

To add a hitch to your 2024 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper leaving…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

Answer 5

The correct wiring harness for your 2024 Kia Telluride SX Prestige X-Line is the Curt #C29ZV. This plugs into the connection points in your rear cargo area and is compatible with your LED lights. The #TK74CR is only designed to work with the LX and S…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...