Redarc Tow-Pro Liberty Brake Controller Installation - 2022 Kia Telluride Video

For a complete towing setup you will need a hitch, 4-way, 7-way, ball mount, and a brake controller. I recommend the following for your 2024 Kia Sportage: -etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"…

If your 2022 Kia Telluride does not have any of the wiring for adding a tow package you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness #C59496 to tie into the tail light wiring for a 4-way flat trailer connector.…

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

The 2021 Kia Tellurides all come with the factory tow package port that the Curt T-Connector Vehicle Wiring Harness part #CU94FR plugs into. It does not have to come equipped with the factory tow package per se. It's a direct plug-in fit for all…

As far as wiring, if you need just brake lights/signal lights alone, you will only need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR. The T-Connector includes a powered converter to ensure that your…

The 2020 and 2021 Kia Telluride trailer wiring setups are the exact same. So yes all of the 2020 Kia Telluride models come with trailer pre-wiring so the #CU94FR that you referenced would fit and work great.

If you do not have a 7-way connection on your 2022 Kia Telluride you will need to start by adding wiring. The first thing you will need to add is a 4-way wiring harness which is the Curt T-Connector Vehicle Wiring Harness #CU94FR. This will plug into…

I have a perfect solution for installing a brake controller on your 2022 Kia Telluride! Since you don't have any wiring, we will need to start from scratch, but thankfully there are plug-in 4-Way options and I recommend going with the Curt…

When it comes to installing The Redarc Tow-Pro Liberty #RED52VR if there is no trailer connected, the active calibration may occur as normal without any indication from the LED., provided your brake light trigger point is active when there is no…

The Curt Hitch #C13420 can actually handle 5,500 lbs as long as you use a weight distribution hitch. However, the rating of 5,000 lbs without one is the best you will find. With a WDH installed the capacity gets bumped up to 6,000 lbs so you would be…

With your trailer having a round plug instead of a flat plug you will need either one of a couple parts. If you do not already have a connector on your 2022 Kia Sportage you will need the T-One Vehicle Wiring Harness #118698. This will give you a…

To complete the installation of the #RED24FR you need to find the cold side of the stop light switch. It will require using a circuit tester like the #PTW2993. This will be the wire that only has power when the brake pedal is pressed. Running an…