Can the Tekonsha Primus IQ Brake Controller be Mounted on Top of the Dash

Question

Question:

Can the brake controller be mounted on top of the dash? In other words is the clip-in bracket reversible? If not are any of the other products reversible? 2007 Ram 3500 Diesel

asked by: Doug W

0

Expert Reply:

The Tekonsha Primus IQ Brake Controller, # TK90160, was not designed to mount upside down in the clip-on bracket, but it is possible. I pulled the brake controller to make a short video for your showing how it will work.

I think we may have one brake controller that will work great for your needs. I recommend the Curt Echo Mobile Trailer Brake Controller - Wireless # C51180. This is a wireless unit so there isn't any orientation issue or anything to be mounted inside the vehicle. It utilizes a mobile app for the manual override braking.

expert reply by: John H

0

Answer 1

The best brake controller solution we have for you and your 2020 Toyota Tacoma is the Recarc Tow Pro Elite part #RED44FR with the custom install harness #3031-S. Unlike other brake controllers this one only puts a really small knob on your dash (or…

view full answer...

Answer 2

Since you are dealing with a ground clearance issue with your tow vehicle and trailer, your best bet is to look into a short weight distribution shank like the Blue Ox shank, #BXW4017. This will provide the most ground clearance possible for your…

view full answer...

Answer 3

For your R-pod travel trailer, the biggest issue you will face is sway , so I recommend he Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW #RP66086 which is rated for total tongue weight between 200 and…

view full answer...

Answer 4

The Tekonsha Primus IQ Trailer Brake Controller #TK90160 referenced in your question uses 10 gauge wire for the 12V (black) and brake output (blue) wires and 12 gauge wire for the brake switch (red) and ground (white) wires. This is the case with all…

view full answer...

Answer 5

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...