Trailer Hitch Receiver Fit For 2024 Volvo XC60

Question

Question:

what hitch fits my 2024 volvo xc60

asked by: JM

0

Expert Reply:

The correct trailer hitch receiver fit for your 2024 Volvo XC60 is the following:

- Curt Trailer Hitch Receiver # C92WR

expert reply by: Kyle S

0

Answer 1

Our Curt hitch part #C92WR is the same as their part number 13484. I am not sure where you saw this hitch as compatible with weight distribution but I checked just now and it is not. None of the hitches we offer for your 2021 Volvo XC60 are rated for…

view full answer...

Answer 2

We have confirmed with Curt that their hitch #C92WR is a confirmed fit for the 2021 Volvo XC60 R-Design.

view full answer...

Answer 3

The hitch from your 2011 is not compatible and will not fit on the new model, but you are not out of luck. A compatible hitch to fit your 2021 Volvo XC60 is the Curt Trailer Hitch Part #C92WR. This is a confirmed fit for all XC60 models in 2021. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Trailer Hitch Receiver Fit For 2024 Volvo XC60

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching