Recommended TorkLift Frame Mounted Camper Tie-Downs For A 2023 Ford F-350

Question

Question:

Hi, Im looking for frame mount front camper tie downs for a 23 F350 crew cab 6.75 bed. Do any of the torklift products fit? If not, when do you think theyll make something for this model? Thanks!

asked by: Justin L

0

Expert Reply:

According to TorkLift's fitment guide the TorkLift Camper Tie-Downs - Front # TLF2022 and Rear # TLF3008 will fit your 2023 Ford F-350 as long as you don't have running boards or steps that sit under the bed. To complete your setup you can also pick up some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020.

expert reply by: Kevin C

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 2

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift…

view full answer...

Answer 3

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 7

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2" Lift…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

You absolutely can install air bags on your 2023 Ford F350 SRW Tremor. The Tremor package does have a few tweaks to the rear suspension, but nothing that will effect fitment of air bags. For you I recommend the Firestone Ride-Rite Air Helper Springs…

view full answer...

Answer 10

To add a set of air bags to your 2024 Ford F-350 4WD, I recommend the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F95FV. I really like the Firestone airbags because they use a crimp rolled design which is much more durable…

view full answer...

Answer 11

The F2032 you're looking for is under part #TL87CR on our website and would be the correct fit for your 2024 Ford F-350. For the rear tie-downs you'll need part #TLF3008. To complete the setup you can use the TorkLift AnchorGuard Derringer…

view full answer...

Answer 12

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...