Recommended Anti-Sway Bar For A 2016 Ram ProMaster 1500

Question

Question:

which sway bar is best for quality, longevity, and actually working smoothly for better ride? Ive got ram Promaster 2016 dodge van 1500 series 136 whlbase.

asked by: Mark S

0

Expert Reply:

For your 2016 Ram ProMaster 1500 with the 136" wheelbase I recommend the Roadmaster Rear Anti Sway Bar # RM-1129-143. At 1-1/8" thick, this sway bar is the thickest bar made for your vehicle. Basically the larger the bar, the more effective it will be. All of the Roadmaster sway bars use a black powder coat which will hold up nicely over time. The rust resistance is solid, but we do recommend periodically touching up any scratches with a black rust-resistant paint to maintain the coating. We have found the Roadmaster sway bars to be very effective in eliminating unwanted movement. You will get noticeable improvements to your ride quality. I have linked our review video below if you want to take a look.

expert reply by: Jesse M

0

Answer 1

Best improvement we can help you with is a rear sway bar upgrade for your 2015 Ram Promaster RV with the Roadmaster sway bar #RM-1129-143. This will do the best job and improving the issues you mentioned. Since Ram built your vehicle without it…

view full answer...

Answer 2

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 3

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Recommended Anti-Sway Bar For A 2016 Ram ProMaster 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching