Can The Tire Step Be Used On The Front Wheel Of a Dually Truck?

Question

Question:

Hitch Mate Tire Step. I have a 2000 f350 cab and chassis and the front rims protrude beyond the tire since it can be used on the dually part of the truck as well. Would the tire step work for this type tire/rim? Thanks,

asked by: Lane B

0

Expert Reply:

While the HitchMate TireStep # HE4040 will work on the rear dually tires on your 2000 Ford F-350 cab and chassis, it will not work on the front wheels and tires since the wheel protrudes out past the tire. We do have the Folding Step Stool # PT36NJ which will give you a 17-1/2" tall step capable of supporting 300lbs while only weighing 9lbs.

expert reply by: Bud M

0

Answer 1

The HitchMate TireStep #HE4040 does not have any additional parts intended to protect your vehicle's rim. However, we haven't had any customers experience this issue using it. Another option is the Powerbuilt Adjustable Tire Step #ALL647596…

view full answer...

Answer 2

We do have a trailer hitch receiver that fits your 2024 Nissan Pathfinder, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C46DR

view full answer...

Answer 3

The Pace Edwards Switchblade part #311-SWD7936 would be a great option and what I would recommend for your 2020 Ram 3500 long bed. This is a retractable cover will easily cover your fifth wheel hitch when not in use and give you complete access to it…

view full answer...

Answer 4

Correct, the fascia trimming is under the bumper on your 2023 Nissan Pathfinder so it won't be noticeable at all for the installation of the Curt hitch that fits your vehicle. The correct part number for that hitch is the following: - Curt…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Installing a wiring harness, like the Tekonsha T-One Vehicle Wiring Harness #118467, on your 2020 Subaru Crosstrek will require access/removal of a few panels in the rear cargo area. I included an install video for you to check out that will…

view full answer...

Answer 7

The Yakima Ladder Roller part #Y01163 will fit the top channels of TracRac TracOne ladder racks like you have.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 11

The Curt #31604 fits all models of the 1999 Dodge Ram 2500 with the exception of the Sport. As long as your truck is not the Sport model you will be able to install this on the front.

view full answer...

Can The Tire Step Be Used On The Front Wheel Of a Dually Truck?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching