Availability of Tandem Axle Trailer Fender for 2017 Lakota Charger 3 Horse Trailer

Question

Question:

Good evening, I am looking for a replacement fender for my 2017 Lakota Charger 3 horse trailer Model #C311. Do you have any that would fit my trailer? Thank you in advance,

asked by: Lori A

0

Expert Reply:

We do have several tandem axle trailer fender setups that could work for your horse trailer but I would need the length of your current fenders as we don't have a way to look that up for your trailer. For example the part # HP64VR is 68 inches long. I attached a link to a page that has all of the fenders we do carry.

expert reply by: Jameson C

0

Answer 1

We have a couple tandem trailer fenders that are 10-3/4 inches wide like with the part #HP84VR and the #HP74VR which are both 72 inches in length but at the 68 inch length of the #HP64VR

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 7

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Availability of Tandem Axle Trailer Fender for 2017 Lakota Charger 3 Horse Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching