Flange Width and Hitch Pin Dimensions for Curt Rebellion XD Adjustable Ball Mount  

The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount #C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is…

We do have something that will work for your application! It looks like you have the Curt Adjustable Weight Distribution Shank #C17100 so to use a ball mount you'll need the Replacement 2" Receiver #C45802 and I recommend using the…

The Curt ball mount part #D900 that you referenced actually fits all of your criteria. It has a 10k capacity when used with the 2-5/16 inch ball, has a solid shank for the hitch and ball platform and has a distance of 15-1/4" from the center…

The distance from the hitch pin hole to where the gusset meets the shank on the Curt #D900 is 4-1/4". Whether or not this will work will depend on how far down your hitch hangs. The greatest amount of clearance from the hitch pin hole is…

The hole spacing is 2-1/2 inches, center to center. The inside span of the channel mount is 2.05 inches, with the outer span being 3.05 inches as shown in the accompanying photo.

The extra long Equal-i-zer shank #EQ90-02-4600 will not affect your trailer towing rating since this is part of a weight distribution (WD) system and it has a tongue weight (TW) range of 600 lbs - 1,400 lbs. Please note that this is labeled as an…

Yes, you can use the Equal-i-zer Weight Dist Shank #EQ90-02-4600 with your Fastway e2 WDS. Weight distribution shanks are pretty universal so you'll have no issues using this one.

The hole spacing on weight distribution shanks is going to be a standard 1-1/4" apart center on center to allow compatibility between manufacturers. I've attached pictures of the Equal-i-zer #EQ90-02-4600 (first picture) and the Curt #C17122…

The part #C45802 shares the same capacities as the ball mount it is designed to fit part #D900. Which is 10k when using the largest ball size of 2-5/16 inch.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.