Recommended Hitch for a 2017 Honda Civic Coupe

Question

Question:

Would this product fit a 2017 Civic Coupe?

asked by: Alex

0

Expert Reply:

No, but there is one that does so long as your 2017 Honda Civic Coupe doesn't have center exhaust. It is the Curt Trailer Hitch item # C11463. This hitch is custom fit and bolts to your Honda with included hardware. It is also a class I hitch with a 1-1/4" receiver.

If you have the center exhaust there are no hitches available for your Civic Coupe. The Curt Trailer Hitch item # C11391 you were looking at stopped fitting Civic's in 2015.

We had a 2017 Honda Civic in awhile back and installed this hitch on it. I have attached a couple of pictures below along with an installation video to show you what it looks like and help you get it set up.

If you are planning on towing you will also need a wiring harness item # C56324 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.

expert reply by: Jerred H

0

Recommended Hitch for a 2017 Honda Civic Coupe
(click to enlarge)

Answer 1

Yes, you can but the manufacturer's recommend not mixing up brands of rails and brackets. Depending on how old they are could also make them incompatible with your 2015 Ford F-150. The mounting holes in the rails may not line up with where…

view full answer...

Answer 2

The best hitch for your 1999 Chevy Silverado LS is the Curt Trailer Hitch item #C15323. This is a class V hitch with a 2" receiver. It has a massive 16,000 lbs capacity which will not be overrated for your truck. It fits the 1500 and 2500 LD…

view full answer...

Answer 3

Yes, so long as you don't try to use both of them at the same time. The Curt T-Connector Vehicle Wiring Harness item #C55124 will work as a 4-flat connector and plugs into your Jeep's existing wiring. If you try to flat tow your 2018 Jeep…

view full answer...

Answer 4

I checked with Roadmaster and Blue Ox and neither recommended putting in a charge line like item #RM-156-25 when flat towing your 2016 Cadillac SRX. However, I took a look at your owner's manual and it says you have to keep your battery…

view full answer...

Answer 5

To add a hitch to your 2023 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch item #DT52GR you were looking at. This hitch is custom fit for the Electric models and bolts to your Hyundai with included hardware. This hitch having a 2"…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...