Recommended Hitch for a 2023 Hyundai Kona Electric

Question

Question:

Need a receiver hitch for bike carrier, 2023 hyndai kona electric, Thanks

asked by: Larry S

1

Helpful Expert Reply:

To add a hitch to your 2023 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch item # DT52GR you were looking at. This hitch is custom fit for the Electric models and bolts to your Hyundai with included hardware. This hitch having a 2" receiver will give you the most options and capacity for bike racks.

expert reply by: Jerred H

1

Answer 1

For your 2022 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch Receiver #DT52GR. This hitch is a class 3 and is rated for 2,000 lbs maximum towing capacity and a maximum tongue weight of 300 lbs.

view full answer...

Answer 2

Yes, per Draw-Tite their Max-Frame Trailer Hitch Receiver #DT52GR will fit your 2023 Hyundai Kona SE electric. The 2" receiver will allow for a larger selection of hitch mounted accessories.

view full answer...

Answer 3

The top of the Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 will sit 9-1/2" out and 24" up from the center of the hitch pin hole on your 2004 Toyota Sienna. I don't have a way to verify whether this gives you enough…

view full answer...

Answer 4

I checked with Roadmaster and Blue Ox and neither recommended putting in a charge line like item #RM-156-25 when flat towing your 2016 Cadillac SRX. However, I took a look at your owner's manual and it says you have to keep your battery…

view full answer...

Answer 5

For lighter duty vehicles like the 2022 Hyunda Kona N-Line there are only 1-1/4 inch hitches available like the Curt part #C87DR. The larger 2-inch hitch size is generally only available for heavier duty vehicles like trucks and SUVs.

view full answer...

Answer 6

I attached an install video of the Kuat NV2.0 part #NV22G on a 2015 Toyota Tacoma and at the 36 second mark you can see that the tailgate can fold down when the rack is tilted with a bike loaded. It would be the same for a 2016 Tacoma since the…

view full answer...

Answer 7

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT52GR will fit your 2022 Hyundai Kona Electric EV. This hitch's 2" receiver opening will allow you a wide array of choices for bike racks and cargo carriers. I…

view full answer...

Answer 8

On the Kuat NV 2.0 bike rack #NV22G it measures 11-7/8 inches from the center of the receiver opening on a trailer hitch to the top of the nearest arm with the arm folded down and the rack horizontal. If, when lowered, the distance from the center of…

view full answer...

Answer 9

I think maybe our fitguide is causing a bit of confusion, but the Draw Tite hitch part #DT52GR is a confirmed fit for your 2022 Hyundai Kona Electric SEL. This fits the electric and non electric models which the way our fitguide is configured causes…

view full answer...

Answer 10

The Erickson clamps #EM09450 are only 2-1/2 inches tall to being with and even though they could likely open up enough you would probably need longer hardware. That is why I would go with #EM09453. Its a larger set of clamps with longer hardware to…

view full answer...

Answer 11

The Kuat NV part #NV22G that you referenced would fit and work well in the hitch of your 2014 Ford F-150. We had the chance to test fit this rack on a similar 2012 Ford F-150 (see attached demo video), and we found that there was a decent amount of…

view full answer...

Answer 12

6-3/4" from the hitch pin hole to the backside of where the 2" receiver starts and 12-1/2" from the pin hole to the outside edge of the 2" receiver. I have linked a diagram below of the Roadmaster High-Low Adapter for Tow Bars…

view full answer...