Recommended Hitch for a 2023 Toyota BZ4X

Question

Question:

Is there a hitch for a 2023 Toyota BZ4X?

asked by: Samuel

0

Expert Reply:

Yes, there is. I checked with our vendors and there is one hitch for a 2023 Toyota BZ4X. It is the Curt Trailer Hitch item # C92NR. This hitch is custom fit and bolts to your Toyota with included hardware.

The Curt item # C92NR is made for accessories only like bike racks and cargo carriers. It has a 200 lbs maximum capacity. I have linked the installation instructions below.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 11

No, you will not have to cut, drill or modify the vehicle in any way when installing the Curt #C26VV on a 2024 Toyota Grand Highlander. This is actually about as easy of a hitch installation as you will see. You will just lift the hitch into place,…

view full answer...

Answer 12

Chad, the etrailer Trailer Hitch Receiver #e54KR you're looking at is not going to work with your 2023 Subaru Outback Wilderness; Instead, you'd want to use the etrailer Trailer Hitch Receiver #e25TR. This hitch is virtually the exact same…

view full answer...

Recommended Hitch for a 2023 Toyota BZ4X

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching