Recommended Replacement Drum Brake Actuator for a Titan Aero 6000
Question:
I am looking to replace my Titan Aero 6000 surge actuator. I have uni servo drum brakes. Is there a replacement that will bolt on using same 3 holes as the Titan?
asked by: Steve S
Expert Reply:
Thanks for the pictures. While I do have a replacement for your Titan Aero 6000 actuator I am not 100% positive it will have the same mounting holes. I have linked a diagram below that will give you the measurements to compare to your actuator.
I recommend the Dexter Brake Actuator with Manual Lockout item # T63FR. This actuator is rated for trailer's up to 7,500 lbs and has a 2" ball coupler. Dexter bought out Titan a few years back so this is as close of a direct replacement as I can find.
If they don't line up I won't have another recommendation and you will need to drill some new holes. Please feel free to email me back directly with any additional questions you may have.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- Manual Lockout
- Dexter
more information >
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Weld On - Disc - 2" Ball - 7.5K
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Kodiak Hydraulic Brake Hose - FIF and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Q&A: Can I Weld on a Bolt on Brake Actuator?
- Video: Review of Dexter Axle Brake Actuator - 099-175-20
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator - DX63FR
- Q&A: Can Surge Coupler Be Used on Boat Trailer With Electric Brakes
- Q&A: Recommended Brake Actuator Coupler for a 1986 EZ Loader Single Axle Boat Trailer w Hydraulic Brakes
- Q&A: Does Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 Have Only Electric Lock Out
- Q&A: Brake Kit and Actuator Needed for a Tandem Axle Boat Trailer
- Search Results: manual reverse lockout
- Shop: Demco Hydraulic Brake Hose with Fittings - 19" Long
- Shop: Kodiak Hydraulic Brake Hose - Straight and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1'
- Shop: Dexter Hydraulic Brake Line with Fittings - 13" Long
- Q&A: What to do Now That Atwood Replacement Master Cylinder 85739 is no Longer Available
- Q&A: Recommended Surge Brake Actuator For Discontinued Atwood 85739
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Search Results: safety chains
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Search Results: stl72rb
- Video: Choosing the Right Brake Controller
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Straight Tongue Trailer Coupler
