Trailer Hitch For A 2022 Hyundai Kona

Question

Question:

I need a trailer hitch for a 2022 hyundai kona

asked by: John D

0

Expert Reply:

For your 2022 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch Receiver # DT52GR. This hitch is a class 3 and is rated for 2,000 lbs maximum towing capacity and a maximum tongue weight of 300 lbs.

expert reply by: Bryce D

0

Answer 1

To add a hitch to your 2023 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch item #DT52GR you were looking at. This hitch is custom fit for the Electric models and bolts to your Hyundai with included hardware. This hitch having a 2"…

view full answer...

Answer 2

I attached an install video of the Kuat NV2.0 part #NV22G on a 2015 Toyota Tacoma and at the 36 second mark you can see that the tailgate can fold down when the rack is tilted with a bike loaded. It would be the same for a 2016 Tacoma since the…

view full answer...

Answer 3

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT52GR will fit your 2022 Hyundai Kona Electric EV. This hitch's 2" receiver opening will allow you a wide array of choices for bike racks and cargo carriers. I…

view full answer...

Answer 4

On the Kuat NV 2.0 bike rack #NV22G it measures 11-7/8 inches from the center of the receiver opening on a trailer hitch to the top of the nearest arm with the arm folded down and the rack horizontal. If, when lowered, the distance from the center of…

view full answer...

Answer 5

For this I go with Curt who says their Trailer Hitch Receiver #C11529 will not fit the 2022 Hyundai Kona electric. The big issue is as Curt says it will not fit and if someone were to install this, if anything were to happen and the blame was put on…

view full answer...

Answer 6

Yes, per Draw-Tite their Max-Frame Trailer Hitch Receiver #DT52GR will fit your 2023 Hyundai Kona SE electric. The 2" receiver will allow for a larger selection of hitch mounted accessories.

view full answer...

Answer 7

The Class I hitch we offer for the 2018 Hyundai Kona, Curt #C11529, is designed for the 1.0L and 1.6L gasoline models. For your 2019 Kona Electric version you will need a different hitch. For your 2019 electric, you would use the Draw-Tite Class 3…

view full answer...

Answer 8

The Erickson clamps #EM09450 are only 2-1/2 inches tall to being with and even though they could likely open up enough you would probably need longer hardware. That is why I would go with #EM09453. Its a larger set of clamps with longer hardware to…

view full answer...

Answer 9

The top of the Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 will sit 9-1/2" out and 24" up from the center of the hitch pin hole on your 2004 Toyota Sienna. I don't have a way to verify whether this gives you enough clearance…

view full answer...

Answer 10

I think maybe our fitguide is causing a bit of confusion, but the Draw Tite hitch part #DT52GR is a confirmed fit for your 2022 Hyundai Kona Electric SEL. This fits the electric and non electric models which the way our fitguide is configured causes…

view full answer...

Answer 11

The Kuat NV part #NV22G that you referenced would fit and work well in the hitch of your 2014 Ford F-150. We had the chance to test fit this rack on a similar 2012 Ford F-150 (see attached demo video), and we found that there was a decent amount of…

view full answer...

Answer 12

I checked with Draw-Tite and they do show the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT52GR as a fit for a 2023 Hyundai Kona EV. This trailer hitch features a bolt-on install so there's no drilling required. It has a class III rating…

view full answer...

Trailer Hitch For A 2022 Hyundai Kona

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching