Leaf Spring For 2,000 lb Trailer Axle That is 20-3/8 Inches Long

Question

Question:

Hey guys, Im looking for this leaf spring. Cant seem to find it. Could you link me?SP-169275 1020 Thank you

asked by: Christopher V

0

Expert Reply:

We do have the SP-169275 leaf spring, which is a 20-3/8" long leaf spring for 2,000 lb axles. We have it as a different part number but is exactly the same thing, and what you are looking for is the following:

- 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR

expert reply by: Kyle S

0

Answer 1

It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square axle.…

view full answer...

Answer 2

Given the dimensions you provided, I believe that a u-bolt kit such as #CE23103 that's typically used to mount a 2 inch square trailer axle to the leaf spring pack would be your best bet. The kit includes two assemblies, each of which includes…

view full answer...

Answer 3

It sounds like the axles were attached with 2 inch U-bolts that are 1/2 inch diameter which are a standard size so it sounds like the axles are compatible with a standard U-bolt kit like the CE Smith U-Bolt Kit for Mounting 2" Square Trailer…

view full answer...

Answer 4

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Leaf Spring For 2,000 lb Trailer Axle That is 20-3/8 Inches Long

Product Page this Question was Asked From

Continue Researching