Does Curt Trailer Hitch Receiver Fit 2023 Toyota Tundra SR Long Bed

Question

Question:

does this fit 2023 Tundra long bed 8foot SR package

asked by: Gabby

0

Expert Reply:

It does; so long as your 2023 Toyota Tundra SR long bed does NOT have the factory hitch, the Curt hitch will definitely fit. The correct part number is the following:

- Curt Trailer Hitch Receiver # C44BR

expert reply by: Kyle S

0

Answer 1

Yes, we do have the parts you will need to add all the parts you need on your 2022 Toyota Tundra for towing. First you will need the Curt Trailer Hitch Receiver #C44BR. This is a custom fit receiver with a 2" receiver tube. For the electrical…

view full answer...

Answer 2

The correct trailer hitch receiver for your 2024 Toyota Tundra without a factory hitch is the following: - Curt Trailer Hitch Receiver #C44BR I verified this fit directly with the manufacturer for you.

view full answer...

Answer 3

The Curt Hitch item #C44BR has a 12,000 lbs towing capacity and a 1,200 lbs maximum tongue weight. This hitch is custom fit for the 2024 Toyota Tundra's that came from the factory without a hitch. This is a class IV hitch with a 2" receiver.…

view full answer...

Answer 4

Yes, the Curt Trailer Hitch Receiver #C44BR will fit your 2023 Toyota Tundra. This hitch is made in the USA, has a 2" receiver, and has a maximum towing capacity of 12,000 lbs.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Does Curt Trailer Hitch Receiver Fit 2023 Toyota Tundra SR Long Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching