Does Draw Tite Hitch # 76199 Fit 2023 Alfa Romeo Stelvio

Question

Question:

Will this hitch work for an Stelvio 2023?

asked by: Carlos I

0

Expert Reply:

Yes, the Draw Tite hitch part # 76199 that you referenced is a confirmed fit for a 2023 Alfa Romeo Stelvio.

expert reply by: Jameson C

0

Answer 1

The best hitch for a 2023 Alfa Romeo Stelvio is the Draw-Tite item #76199. This hitch is custom fit and bolts to your Alfa with included hardware. This is a class III hitch with a 2" receiver. This hitch has a 4,000 lbs towing capacity and a…

view full answer...

Answer 2

Yes, you will still be able to use the kick sensor with the draw tite #76199 installed on your 2023 Alfa Romeo Stelvio. That being said, the hitch can limit the sensor in the area directly under the hitch receiver. However if you wave your foot to…

view full answer...

Answer 3

The 2020 Alfa Romeo Stelvio (All Models) would be best matched with the Stealth Hitches Hidden Rack Receiver part #SH54FR for bike racks and cargo carriers or the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit part #SH54FRT for trailer…

view full answer...

Answer 4

The Draw-Tite #76199 does come with instructions for installation, but I've gone ahead and attached a set to this answer as well.

view full answer...

Answer 5

Installing the Draw-Tite #76199 Class III hitch on your 2021 Alfa Romeo Stelvio will prevent the liftgate sensors under the center of the bumper from picking up movement, but if you wave your foot a few inches to one side or the other of the hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Does Draw Tite Hitch # 76199 Fit 2023 Alfa Romeo Stelvio

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching