Stainless Steel Hub & Rotor Disc Brake Kit With Oil Bath & 6 on 5-1/2 Bolt Pattern For Boat Trailer
Question:
My saltwater boat trailer hubs, spindles and brakes are badly rusted and probably need to be replaced. 15 x 6 bolt x 5.5 wheels, single torsion axle, 3900 pound capacity trailer. Stainless and oil bath hubs preferred. Please recommend parts needed for repairs. Thank you!
asked by: Jim L
Expert Reply:
Since you have 15 inch wheels with a 6 on 5-1/2" bolt pattern the only disc brake kit that would work are for 5,200 lb to 6,000 lb axles, though you mentioned having a 3,900 lb capacity trailer. But since you are replacing your spindle, this won't be an issue, as you'll just weld on the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles # TRU57FR.
Then for a disc brake kit that fits this spindle, there isn't a fully stainless option that also has an oil bath, but if you're okay with the calipers being stainless and the hub/rotor being dacromet go with the Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/Stainless - 5.2K to 6K - Oil # KOD36FR.
Or, for a totally stainless steel version that uses grease, go with the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs # K2R526S.
A couple things to keep in mind is that you do need to have a qualified welder fabricator weld on your new spindle, and also for these brakes you do need to have a 5-bolt brake mounting flange.
Products Referenced in This Question
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/Stainless - 5.2K to 6K - Oil
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Demco Replacement Large Bore Aluminum Master Cylinder w/ Bypass Solenoid - Disc Brakes
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Video: Review of Demco Trailer Brake Parts - Brake Line Grommet - DM01863
- Search Results: k2r35s
- Search Results: brake hose kit
- Shop: Replacement Rubber Grommet for Demco Tow Dolly Brake Line - 5/8"
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 15'
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Video: Review of Titan Brake Actuator - T4820000
- Article: Printable Trailer Bolt Hole Pattern Template
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Master Cylinder for Demco Actuators - Disc Brakes
- Q&A: How to Switch Titan Model 60 Drum Brake Actuator to Disc Brake Actuator
- Q&A: Dimensions of the Bolt Holes on the Replacement Master Cylinder Assembly T4820000
- Video: Review of Kodiak Trailer Brakes - 10" Hub/Rotor Dacromet Disc Brakes - KOD49FR
- Q&A: Are Oil bath Hubs a Better Option for My 7,000 Lbs Axles Than Using Grease Hubs
- Q&A: Lug Nut Torque Setting for 14-Inch Steel Trailer Wheels on 1/2-Inch Wheel Studs
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Trailer Hitch
- Search Results: 44649
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: 68149
- Shop: Fifth Wheel Hitch