Recommended Rhino Rack Backbone System for a 2022 Ford F-150

Question

Question:

Does the rhino rack backbone work on a Ford F150 crew cab? It only list F250 and above.

asked by: Jason

0

Expert Reply:

The Rhino-Rack Backbone Mounting System for Pioneer Platform # RR38QJ is actually specifically meant to work with GMC Sierra and Silverado trucks so it's not going to work with your F-150.

Instead, I recommend checking out the Rhino-Rack Universal Modular Backbone Mounting System for Camper Shells # RR24AT for a long (68") set or # RR57AT for a short (56") set.

These backbones are universal so they are going to work with your 2022 Ford F-150 and has a dynamic weight capacity of 265-lbs.

expert reply by: Bryce D

0

Answer 1

For your A.R.E. MX cap, I recommend the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 81" Long - Qty 2 #RRRTV208 which you can cut to length if you desire. For your system due to the length, I recommend you go with 3 crossbars to cover…

view full answer...

Answer 2

Yes, the Rhino Rack Universal Backbone Mounting System part #RR24AT is the same as the RUMB1. This is the correct kit to use to mount to your ARE camper shell so it would be what you need.

view full answer...

Answer 3

Great question! The spacing from the center of 1 track to the center of the next for the Rhino-Rack Universal Pioneer Platform Rack #RR42115BF is going to be 9" for those center slats according to my contact at Rhino-Rack. The distance to the…

view full answer...

Answer 4

Yes, the Rhino-Rack Universal Modular Backbone Mounting System will work with your ARE MX truck cap. Since you plan to use the 72" x 56" platform, you will want to go with the long backbone. We actually sell all of this as a complete kit…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...