Roadmaster Comfort Ride Leaf Spring Suspension For a 2022 Winnebago Minnie 2529RG Travel Trailer

Question

Question:

I have a 2022 Winnebago 2529RG travel trailer with tandem 4400# axles, 3-inch diameter. Is the RM-2460-2580 the correct part number for this application? The factory GVWR is 8800#, approximately 6200# dry weight.

asked by: Tim T

0

Expert Reply:

You will need to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2560 for your 2022 Winnebago Minnie 2529RG travel trailer. These leaf springs are rated for 5,000lb axles while the ones in the Kit # RM-2460-2580 you found are rated for 8,000lb axles. If you used the heavier springs your trailer would bounce a lot more and the suspension would not properly absorb the bumps. The kit # RM-2460-2560 also includes the shocks for mounting to your 3" diameter 4,400lb axles.

expert reply by: Bud M

0

Answer 1

Yes, you can still install the Roadmaster Comfort Ride Leaf Spring Suspension Kit even though the trailer rides slightly nose high when coupled to the tow vehicle. When installing one of these kits you'll most likely need to get longer U-bolts…

view full answer...

Answer 2

I believe you are referring to the wear pad where the leaf springs make contact on the #RM-2460-2560. You can use an all purpose grease here at the point of contact. Assuming that is where the sound is coming from this should eliminate the squeaking.…

view full answer...

Answer 3

Yes you can just use one MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR with your 2021 Jayco Jay Feather 25RB, however for full support a tandem axle trailer will need to utilize 3. Attached is a product overview…

view full answer...

Answer 4

The Roadmaster Comfort Ride system part #RM-2460-2560 is a much more complete and better performing kit than just shock kits. The shock kits are sometimes challenging to install since they don't always like to easily fit all applications well…

view full answer...

Answer 5

Yes, since we know your 2020 Grand Design Reflection 28BH has 7k trailer axles the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560 that you mentioned does fit it and would work really well to make the ride quality…

view full answer...

Answer 6

It's a good question, but your Grand Design's double-eye springs aren't compatible with the bracket for the slipper springs (which have a different style) of the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560. You're…

view full answer...

Answer 7

Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…

view full answer...

Answer 8

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…

view full answer...

Answer 9

According to our contact at MORryde, the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR works with the Road Armor cushioned equalizers so this would be what you'd want.

view full answer...

Answer 10

Yes, the Roadmaster Comfort Ride Slipper Spring System part #RM-2560 will work great with 5,000 lb axles. If you wanted to add shocks to the kit to allow it to have an even smoother ride you'd want the shock kit part #RM-2460 which is designed…

view full answer...

Answer 11

Yes, you can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit 8K part #RM-2460-2580 with 7,000 lb axles.

view full answer...

Answer 12

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item #RM-2460-2580 are not designed to raise or lower your trailer's ride height. You may see a slight height increase because there won't be as much strain on the springs.…

view full answer...