MORryde RV TV Wall Mount - Horizontal Slide/Swivel - 35 lb Capacity - Steel

Video Transcript for Review of MORryde RV TV Mount - Wall Mount - MR82ZR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this MORryde horizontal, sliding TV wall mount. This is a wall-mounted bracket that'll securely hold your RV's TV to the wall. The TV will mount to this mounting plate right here, and then the TV mount itself will slide horizontally up to 20 1/2 inches, and the end will swivel 180 degrees so that you can find the best viewing angle. Basically to show you what we're talking about, there's a little lever here, that if you push down on that lever, it'll release the mount from the pin right here. You can see it allows that to slide so far.

Once that gets so far, you can actually then take your mounting plate and slide that the rest of the way, so it gets you a total of 20 1/2 inches horizontally. And then once you get to the end over here, you'll see this knob that'll allow you to swivel with your TV mounted here. If you pull up on that knob and move your TV, every 45 degrees, it'll lock into place. Pull up again, you can see it's at 90 degrees. Pull up again, and it keeps going all the way, all the way to that side, so 180-degree swivel.

Also what's nice is when you're done viewing, this mount will totally lock into place to keep your TV safe when you're traveling in your RV. Basically, again, you'll just slide this all the way this way and then completely all the way that way, and then just push down on your lever. Again, that'll let it lock onto that pin, and you can see it won't go anywhere, so it'll lock into place. This TV mount does have a maximum load capacity of 35 pounds. It is a very simple installation.

The mounting bracket; let me flip it around here. You can see, here's the mounting brackets with the holes in it. Comes with the hardware to install this to your wall. It'll also come with the hardware to install your TV to the mounting plate. It is very simple installation.

It will accept three different VESA-compliant mounting patterns on your TV. If your TV has the 75-millimeter by 75-millimeter pattern, it'll work, the 100-millimeter by 100-millimeter pattern, or the 200-millimeter by 200-millimeter pattern. It will line up to these holes, and with the hardware, you can install your TV. This part is made in the USA. Few specs on this now, dimension-wise. When it's fully retracted like it is now, locked into place, width-wise, it's 20 inches wide. Height from bottom to the top now is about 13 inches tall. And the total depth from the back to the very front here is about 4 5/8 inches deep. We mentioned the extension. When you release it and extend it all the way out, it's 20 1/2 inches. So then your overall dimensions when it's extended; 40 1/2 inches wide, same height of 13 inches, same depth of 4 5/8 inches. The TV mounting plate, this portion right there; if we measure that, the width of it is 8 7/8 inches. The height is gonna be right at 10 1/8 inches tall. But again, just to go over the . Push down on this lever to release it to slide. Slide it just like that. Then you can slide the TV the rest of the way. When you get to the end, if you want, you can actually pull up from the knob and allow it to rotate whatever position you need. Gives you the best viewing angle. And then when you're done, just put TV back. Slide this back. Slide the horizontal portion all the way back and push down on that handle. It'll let it go onto the pin and lock it into place. But that should do it for the review on the MORryde horizontal, sliding TV wall mount..