Overall Height of Timbren Suspension Enhancement System T45MR For Toyota Tundra

Question

Question:

I have a 2022 Toyota Tundra TRD Limited 4x4. It appears like the distance from the OEM part to the frame is just over 4. What is the distance from the T45MR to the frame? Or you can give me the length from the bracket that bolts to the frame to the bottom of each.

asked by: Les

0

Expert Reply:

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System # T45MR.

expert reply by: Kyle S

0

Height of Timbren Suspension Enhancement T45MR
(click to enlarge)

Answer 1

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 2

For your 2023 Toyota Tundra, the best suspension enhancement, particularly for towing, are the Timbrens, with the correct part number for your '23 Tundra being the following: - Timbren Suspension Enhancement System - Rear Axle #T45MR What the…

view full answer...

Answer 3

The best Timbren kit for your 2024 Toyota Tundra is the Timbren Suspension Enhancement System #T45MR rated for 6K. The Off-Road kit and the 7K kit will have the Timbren bumpers engaging a bit quicker than what you'll need with standard vehicle…

view full answer...

Answer 4

The Coil SumoSprings #CSS-1094F are designed to add additional support to the front. Since you don't have a front load on your 2022 Toyota Tundra I don't think this will be necessary or make a real difference. As for the Timbren #T45MR, I…

view full answer...

Answer 5

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 6

It will! I verified with Timbren for you that your 2023 Toyota Tundra TRD Pro is 100 percent compatible with the Timbren system, with the correct part being the following: - Timbren Suspension Enhancement System #T45MR This is a nice upgrade for a…

view full answer...

Answer 7

A hitch extender or adapter, like the dual-receiver MT70070, cannot be used with weight distribution (WD) systems. As you note, use of ANY adapter has the unavoidable side-effect of cutting your hitch's capacity by 50-percent. An adapter would…

view full answer...

Answer 8

We have one set of universal style tow mirrors that fit your 2023 Toyota Tundra with the K-Source mirrors part #KS69ZR which we had the chance to install on a similar 2022 Tundra which I attached a review video for. We found the install was easy, the…

view full answer...

Answer 9

The parts you're needing for your 2023 Toyota Tundra are the following from TorkLift: - Front #TL57CR - Rear #TL37CR

view full answer...

Answer 10

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 11

We have an Air Lift Load Lifter 5000 that fits your 2022 Toyota Tundra TRD Pro with the part #AL84JQ but we do not have the 1000 version that installs in the coils of the rear springs.

view full answer...

Answer 12

With the Timbrens there isn't a difference in fitment between standard model Tundra's and the TRD Pro so you'll be able to use one of the following options for your rear suspension: 4,800lb capacity #T83MR 6,000lb capacity #T45MR 7,000lb…

view full answer...

Overall Height of Timbren Suspension Enhancement System T45MR For Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching