Tow Mirror Recommendation for 2023 Toyota Tundra

Question

Question:

I would like to know my options for tow mirrors for my 2023 Toyota Tundra.

asked by: Richard L

0

Expert Reply:

We have one set of universal style tow mirrors that fit your 2023 Toyota Tundra with the K-Source mirrors part # KS69ZR which we had the chance to install on a similar 2022 Tundra which I attached a review video for. We found the install was easy, the mirror was stable, and the wider view provided was helpful.

expert reply by: Jameson C

0

Answer 1

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 2

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 3

A hitch extender or adapter, like the dual-receiver MT70070, cannot be used with weight distribution (WD) systems. As you note, use of ANY adapter has the unavoidable side-effect of cutting your hitch's capacity by 50-percent. An adapter would…

view full answer...

Answer 4

With the 2022 Toyota Tundra being all new and using different mirrors we have tested the K-Source Universal Towing Mirrors #KS69ZR on your truck. I have linked a video below that shows the installation and fit of these mirrors. Currently there are no…

view full answer...

Answer 5

Yes, we do have some towing mirrors that will work for your 2023 Toyota Tundra. - K-Source Universal Towing Mirrors #KS69ZR These towing mirrors have a tool free install using a strap system that creates a snug fit to reduce vibration. This will…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

For your 2023 Toyota Tundra, the best suspension enhancement, particularly for towing, are the Timbrens, with the correct part number for your '23 Tundra being the following: - Timbren Suspension Enhancement System - Rear Axle #T45MR What the…

view full answer...

Answer 11

The best Timbren kit for your 2024 Toyota Tundra is the Timbren Suspension Enhancement System #T45MR rated for 6K. The Off-Road kit and the 7K kit will have the Timbren bumpers engaging a bit quicker than what you'll need with standard vehicle…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...