Can You Raise L-Brackets on Equal-i-zer Weight Distribution More Than Level with Frame
Question:
2021 GMC 3500HD diesel pulling travel trailer that weighs close to 6000 lbs loaded. equalizer trunnion distribution hitch. I am sagging in the rear about one inch after attaching the trailer and applying WD. Have seven washers in head for head angle. Hitch ball is one inch above trailer coupler. Could raise L-brackets but then arms would not be even with the trailer frame. I feel as though the truck should be closer to riding stock ride height. Trailers pull nice with minimal sway and very solid on the road with current setup. Thoughts? Thanks
asked by: Bryan E
Expert Reply:
I spoke to Equal-i-zer about your setup and they informed me that if you need more adjustment for being under distributed, you can raise the brackets on the frame beyond level if you have already added the maximum number of washers to the angle bolt. I would also add that making sure you have the correct system is another thing to check so if you can get your exact loaded tongue weight, we can then confirm if you have the correct system.
If you do have the correct system and still cannot get the vehicle completely level, I recommend air bags like the Firestone Ride-Rite Air Helper Springs part # F2613.
Products Referenced in This Question
Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Heavy Duty
- Firestone
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Replacement Spacer Washer for Equal-i-zer Weight Distribution Head
- Shop: Suspension Enhancement
- Shop: Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Video: Equal-i-zer Weight Distribution EQ95-01-9450 Review
- Q&A: Weight Distribution System Recommendation for 8,000 LB Travel Trailer
- Q&A: Eliminating Trailer Bounce When Towing And Using Weight Distribution System
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount
- Shop: Trailer Hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Search Results: 25980ez
- Search Results: 90160
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Rear Suspension Enhancement System Review RU-18-TA-00302588
- Q&A: Can Air Lift Kit Fit with 5th Wheel Brackets on a 2024 GMC Sierra 3500
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Video: Choosing the Right Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: fender
- Search Results: hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper