Correct Air Lift LoadLifter 5000 Ultimate Plus Air Springs for a 2019 Ram 1500 Rebel

Question

Question:

I have 2019 ram rebel quad cab 1500 4×4 5.7L with 3.92 rear can I use the air lift load lifter 5000 ultimate plus

asked by: Frank

1

Helpful Expert Reply:

The Air Lift LoadLifter 5000 Ultimate Air Springs with Internal Bumpers part # AL88375 are a fit for a 2019 Ram 1500 Rebel. You can add the Plus Upgrade Kit # AL52301 to get the stainless components.

expert reply by: Conner L

1

Answer 1

Yes, the spring plates in the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs #AL52301 are stainless steel. The length of the stainless steel braided air lines is 5.5'.

view full answer...

Answer 2

I looked up your 2021 Ram 1500 Off Road Edition and it has a 1 inch lift from the factory and could possibly have the factory air suspension. So we don't have anything that fits with the factory air suspension but if instead you have the coil…

view full answer...

Answer 3

We can get you set up with a nice kit for sure! To start you of course need bags and the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88375 is a nice solid choice which will give you 5,000 lbs. of load leveling capability. This will…

view full answer...

Answer 4

Yes the Air Lift LoadLifter part #AL88375 that you referenced does fit the 2019 Ram 1500 new body style like you have.

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 12

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...