Recommended 7 Inch Brake Drums and Brake Assemblies
Question:
I have a 1995 Jayco 1207 tent trailer with hydraulic brakes. Atwood is out of business so parts are not available. The brakes are 7X1 3/4. The only electric conversion brakes listed are 7X1 1/4. Is this considered to have the same stopping power? Also, I am looking for 7 inch drums that are 4 on 4 bolt pattern for electric brakes. Dexter Torflex axle, with 4 bolt backing plate mount, Label is gone, but axle would be rated between 2,000 and 2,400 pounds. Trailer net wt. about 1,800 and gross about 2,200#. Would the above be a direct bolt on. Thanks
asked by: Ken W
Expert Reply:
Hydraulic brakes are typically better than electric brakes. They engage quicker and more evenly but we're talking fractions of a second. The hydraulic brakes having a 1/2" more braking surface will help them stop quicker.
To replace your 7" drums, I recommend the Dexter Trailer Hub and Drum Assembly item # 8-173-16UC3. These are for 2,200 lbs axles and work with both drum and electric brakes. They have a 4 on 4 lug pattern and include lug nuts, bearings, races, and seals. This hub fits a inner bearing and outer bearing item # L44649. These are sold individually.
For a set of electric brakes that fit these drums you will want the Dexter Electric Trailer Brake Kit item # 23-47-48. This is both the left and right side assemblies. They are rated for a 2,000 lbs - 2,200 lbs axle. They also have a 4 bolt mounting flange.
I have linked an installation video below.
For a set of hydraulic brake assemblies that fit the Dexter item # 8-173-16UC3 hub you will want the Dexter Hydraulic Trailer Brake Kit item # 23-398-399. These are rated for 2,500 lbs and also have a 4 bolt mounting flange.
The Demco Hydraulic Trailer Brake Actuator item # 8759121 you were looking at is a bolt on. I have linked a review video below that shows the dimensions.
Products Referenced in This Question
Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Demco Hydraulic Trailer Brake Actuator - Drum Brakes - Zinc Plated - Adjustable Channel - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 8000 lbs GTW
- Channel Only
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: Recommended 4 on 4 Idler Hub for an Axle w/ L44649 Inner and Outer Bearings
- Search Results: 4 on 4 hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Search Results: btr spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Maximum Speed Rating of kenda Loadstar # AM1ST92
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Q&A: Replacement Tire and Wheel Options for 20.5x8.0-10 Size Trailer Tires With 4 Lug Wheels
- Search Results: 20.5 x 8 10 tire and rim
- Q&A: What Trailer Weight Requires Brakes
- Search Results: junction box
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Gooseneck Hitch
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: bk2~100
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Search Results: 25580
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Fifth Wheel Hitch