Equivalent Hub Assembly to CE Smith Trailer Hub Assembly # CE13100 with Lug Bolts Built In
Question:
I need to replace both hubs on my trailer. Its a 1990 Remeq 2S78 trailer. But I want to get away from the hubs with the lug bolts and go to a hub the lug bolts built in. I dont know which hub would be the equivalent of the one above.
asked by: Derryl D
0
Products Referenced in This Question
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Trailer Hitch
- Q&A: Installation of Wiring Harness in Rear Cargo Area Instead of Underneath Vehicle on Subaru Outback
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2022 Subaru Outback Wagon DT73RR
- Shop: Trailer Wiring
- Video: Best 2022 Subaru Outback Wagon Trailer Hitch Options
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2022 Subaru Outback Wagon
- Video: etrailer Class III Trailer Hitch Installation - 2022 Subaru Outback Wagon
- Video: Curt Class III Trailer Hitch Installation - 2022 Subaru Outback Wagon
- Video: Best 2022 Subaru Outback Wagon Trailer Wiring Options
- Q&A: Least Visible Trailer Hitch for 2019 Subaru Outback Wagon
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13100 Review
- Article: Most Popular Wheel Bearings
- Search Results: marine grease
- Q&A: Bearing Kit Replacement for BT-100 Trailer Hub
- Q&A: Are Spindle Washers Needed if the Trailer Axle Does Not Already have Them
- Q&A: Spindle Washer Needed For 2000 LB Axle With Standard Spindle
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Search Results: 4.80x12 tire and rim
- Search Results: trailer hub bearing
- Search Results: load range chart
- Search Results: l44643
- Search Results: bt8 hub