Drop Leg Fitment on Lippert LC285318 Electric Jack

Question

Question:

Will this drop leg fit on Lippert LC285318 electric Jack?

asked by: Steve M

0

Expert Reply:

Yes, the Drop Leg for Lippert Power Jack # LC405217 is compatible with your Lippert LC285318 electric jack.

expert reply by: Jon G

0

Answer 1

We do have the correct replacement drop leg for your Lippert Electric Jack #LC285318 but the one you mentioned won't fit as it doesn't have the correct hole spacing or diameter. Instead, the only option we know will work is the direct…

view full answer...

Answer 2

If you're looking for the hard plastic piece that covers the manual override on your Lippert Smart Jack Electric Trailer Jack #LC643589, you can use part #LC733925. Aside from that and the drop leg #LC405217, Lippert does not offer any other…

view full answer...

Answer 3

We have a drop leg that fits your Lippert powered a-frame jack with the #LC405217 but the part number you mentioned fits a different brand and would not work.

view full answer...

Answer 4

The Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black #LC285318 has a drop leg available that will give an extra 4-1/2 inches with #LC405217.

view full answer...

Answer 5

Yes, the replacement foot part #LC405217 that you referenced is the correct fit for your Lippert a-frame jack part #1817941 that you have.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Drop Leg Fitment on Lippert LC285318 Electric Jack

Product Page this Question was Asked From

Continue Researching