Upgraded Equalizer and Hardware for 2017 Keystone Bullet 243BH

Question

Question:

Hi, I am looking for a wet bolt equalizer and a shackle upgrade kit for my 2017 keystone bullet 243BH. The axle spacing is 42 inches and equalizer center hole to hole is 10 inches. Any help would be greatly appreciated. Thanks!

asked by: Casey L

0

Expert Reply:

Thank you for providing that information. Since your equalizer measurement is 10" you would not want to use the # MR34AR even though it is for a 42" wheelbase. Instead, you need the # MR54AR. This is also designed for a 42" wheelbase and matches your 10" equalizer length.

For the wet bolts, bronze bushings, and shackles you need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers. You will need to measure your existing shackles from center hole to center hole to choose the correct kit. For 2-1/4" long shackle straps you need the # MR46ZR and for 3-1/8" the # MR76ZR.

expert reply by: Robin H

0

Answer 1

For your 2017 Keystone Bullet Ultra Lite 251RBS with the 43" wheelbase your trailer is most likely using either a 10" #MR54AR or 14-3/4" #MR34AR equalizer. You will need to measure your current equalizer from center of bolt hole to…

view full answer...

Answer 2

The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use #MR46ZR or for 3-1/8 inch shackle links, use…

view full answer...

Answer 3

To change your equalizers on your 2013 Keystone Bullet Premier we don't have the exact equalizer you are seeking. Your premier I believe has the 42 inch on center axles which is a wider stance than standard, so changing other components like leaf…

view full answer...

Answer 4

The difference is the length of the equalizers that come with the kit. The part #K71-449-00 comes with equalizers that are 7-3/4 inches from eye to eye whereas the part #K71-359-00 has equalizers that are 2 inches shorter at 5-3/4 inches.

view full answer...

Answer 5

I would be happy to help you find the correct equalizer upgrade for your 2017 Keystone Bullet Premier Ultra Lite 22RBPR Travel Trailer with a 43" wheelbase, but since we do not have a kit that is specifically designed for that wheelbase you will…

view full answer...

Answer 6

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 7

The E-Z Flex Equalizer for 1-3/4" Double Eye Springs - 8-3/8" Long - 9/16" Center Hole #013-146-03 is the best upgrade option for each equalizer your 2019 Keystone Bullet 243BHS. This will give you a suspension upgrade with integrated…

view full answer...

Answer 8

You will only need one of the MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K, part #MR34AR. It comes with a pair, one for each side of trailer. You will need the correct mounting hardware for your…

view full answer...

Answer 9

To find the correct E-Z Flex Equalizer, you will need to take off your current ones and measure the distance from the center of the one end hole to the center of the other. You will also need to ensure that your leaf springs are 1-3/4" wide.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 12

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...