Replacement Bearing Kit for 3,500 lb Axle on Shorelander Trailer
Question:
I need grease seals for my shorelander trailer with a 3500# tapered axle. Kit BK2-100 has the correct bearings but the grease seal might not be right. The problem that I see is that Shorelander uses a spindle sleeve that has an OD of 1.749. The grease seal that Shorelander specifies is 1.741 x 2.561 The grease seal included in the Bk2-100 kit measures 1.719 x 2.565 Will the grease seal included in your kit work with the Shorelander spindle sleeve or will it be too tight?
asked by: Jim
Helpful Expert Reply:
The grease seal that comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindles # BK2-100 will definitely work for your application.
You want grease seals to be as close to matching specs as possible, but a difference of 0.008" won't be an issue - it's actually better that it is slightly smaller than it would be for it to be slightly bigger.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Shop: Grease Seals (pair)
- Shop: Grease Seal
- Shop: Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Shop: Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Brake Controller
- Q&A: Bearing Buddy Recommendation for Dexter Hub 8-248 3,500 lb Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Search Results: 84 spindle
- Search Results: 10 60 seal
- Search Results: #84 spindle bearing kit
- Search Results: brkh10a
- Search Results: 4410130
- Search Results: seal~cross~reference
- Q&A: Where to Find VIN/Serial Number on Boat Trailer
- Search Results: spindle wear sleeves
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Trailer Hub that Fit Axle Spindle that is 1-1/16 inch In Diameter for Both Bearings
- Q&A: Can Bearings for a 1-1/16 Inch Spindle Replace Bearings for a 1 Inch Spindle Using Same Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Article: Most Popular Wheel Bearings
- Video: Choosing the Right Brake Controller