Can You Flip RockyMounts Hitch Extender LS Upside Down

Question

Question:

Can I install the RockyMounts RKY1011 upside down.inch The placement of the factory seven-pin wiring connector on my 2023 Bronco makes it very difficult to put the lock on the drivers side.

asked by: Kevin

0

Expert Reply:

In regards to the RockyMounts Hitch Extender LS part # RKY10011, the hitch pin has to be inserted from the passenger side for the anti rattle to engage. That said, you should be able to simply turn the extender upside down so that the hitch pin is then inserted from the driver side.

expert reply by: Conner L

0

Answer 1

So I was unable to find your order based on your email or name, so I'm not sure which hitch you bought from us, but what I can tell you is that based on installations we've done, the trailer hitch for your 2019 Ford Transit T150 with the best…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Answer 10

I'm happy to say that there is indeed both a trailer hitch and trailer wiring for your 2024 Chevy Trax. The fits for both parts on your '24 Trax are the following: - Curt Trailer Hitch Receiver #C75VV - Tail Light Converter with 4-Pole Flat…

view full answer...

Answer 11

Yes, the Draw Tite hitch part #DT73RR does fit the 2024 Subaru Outback Touring XT as it fits all 24' models. It's pretty common to have to lower the exhaust for hitch installs as well.

view full answer...

Answer 12

The Curt Trailer Hitch Receiver #C69VV does fit the 2024 Subaru Outback Wilderness. Ground clearance will be further reduced at the rear compared to other hitches for the Outback since it has a visible cross tube. Bumper removal is not required, but…

view full answer...

Can You Flip RockyMounts Hitch Extender LS Upside Down

Product Page this Question was Asked From

Continue Researching