Trailer Hitch Receiver Recommendation for a 2023 Acura MDX

Question

Question:

Looking for a hitch for 2023 MDX Sh-AWD Advanced trim. Do any of yours fit with an OEM look without cutting trim?

asked by: Stephen R

1

Helpful Expert Reply:

All of our aftermarket hitch receivers install under the trim on your 2023 Acura MDX - none of them fit up into that piece of removeable trim like we see with the OEM hitch model.

If you're okay with that type of hitch receiver then I recommend picking up the Draw-Tite Max-Frame Trailer Hitch Receiver # DT42MR because it has an integrated bracket for attaching the # 18144 wiring connector bracket to if you plan on also installing the Curt Wiring Kit # C59236.

expert reply by: Jon G

1

Answer 1

Yes, we do. To add a hitch to your 2023 Acura MDX, I recommend the Curt Trailer Hitch item #C22HR. This hitch is custom fit and bolts to your Acura with included hardware. I really like this hitch because the crosstube installs behind your rear…

view full answer...

Answer 2

I would be happy to help you. The difference in the installation time between the two hitch receiver's on your 2022 Acura MDX is that the Curt item #C22HR sits lower when mounted so it does not requiring trimming of the rear bumper cover.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...