Recommended 7-Way Connector for a 2020 Kia Sorento

Question

Question:

Will this fit a 2020 Kia sorento

asked by: Ken H

1

Helpful Expert Reply:

I have a solution for you but the item # C68JR does not fit a 2020 Kia Sorento. The connectors are different and won't match up. Instead you will want the OEM Replacement Vehicle Wiring Harness item # TK24FR if you have the factory tow package.

If you do not have the factory tow package you are going to have to use the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.

If your Sorento does not have a 4-way connector you will also need the Curt T-Connector Vehicle Wiring Harness item # C56256.

I have linked installation videos below for all of these parts. If you have anymore questions please email me back and I will be happy to help.

expert reply by: Jerred H

1

Answer 1

Since the 5-way harness is a lot less popular than the 4-way there isn't a plug and play adapter solution available for basically any vehicle. So for your Kia Telluride that has a 4-way currently you would need to use a 5-way adapter like…

view full answer...

Answer 2

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer…

view full answer...

Answer 3

The Blazer LED Off-Road Warning Light Bar item #BL33VR does not come with a wiring harness. It has to be purchased separately. The wiring harness includes a switch for changing the colors and turning on and off. The included mounting bracket will…

view full answer...

Answer 4

Yes, you can definitely use the Redarc Brake Controller item #RED24FR in your new Sorento. It looks like the 2020 Sorentos did not come with a plug for a brake controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake…

view full answer...

Answer 5

Yes, it does. I checked with Roadmaster and the Comfort Ride Leaf Spring Suspension Kit item #RM-2460-2570 will work with your Luxury Lifestyle 5th wheels 33-1/2" axle spread. Your 7,000 lbs axles should be 3" diameter so this is definitely…

view full answer...

Answer 6

I have a solution for you but they don't make a specific kit for a 1-3/4" diameter axle like they do with the 2-3/8" item #K71-384-00. To make your own conversion kit for a 1-3/4" diameter axle all you will need is the U-bolt kit…

view full answer...

Answer 7

Yes, it will so long as your 2017 Ford has the factory puck system. The Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package item #DM6175 attaches directly to the in-bed pucks. This adapter will provide the industry standard hitch…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...