Does Trailer Wiring Power Wire Have to Run Through Interior of Vehicle

Question

Question:

When installing trailer wiring harness, Can I run the hot wire from battery under hood to hitch on rear through the inside of the cabin instead of under the car?

asked by: Shawn

0

Expert Reply:

When running the power wire for a trailer wiring harness you can run it through the interior or underneath the vehicle to get to the battery under the hood. Whichever is easiest would work just fine. I attached a help article on this subject for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Honestly Dean, I'm not sure what would happen if you try to use the 12 volt outlet at the rear of your Toyota RAV4 when installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56434. Reason why is…

view full answer...

Answer 2

The Curt trailer wiring harness part #C56434 shouldn't have anything to do with the lane tracing assist of your 2024 Toyota RAV4 but I would first try removing the harness to see if the problem persists or not. If so it's not related…

view full answer...

Answer 3

For your 2020 Toyota RAV4 Hybrid the best trailer wiring harness available is the Curt #C56434 because it features a higher amp capacity than the Tekonsha alternative and also sports a superior converter box that tends to last much longer than…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56434 will work well to power the lights on your utility trailer towed by the 2019 Toyota RAV4. Both brands will work and really the only difference is the brand.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Does Trailer Wiring Power Wire Have to Run Through Interior of Vehicle

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching