Parts Needed To Replace Slipper Spring With Double Eye Leaf Springs On a 2002 Coleman Mesa 3651
Question:
Im seeking replacement leaf springs for my 2002 Coleman Mesa 3651. Need to know the direct replacements and the eye bolts that fasten them to the front shackles. They are a slipper on the back, bolt up in the front. Thanks in advance
asked by: Robert S
Expert Reply:
As we will not have a slipper spring that fits your 2002 Coleman Mesa 3651 I recommend upgrading to a double eye leaf spring system. You will only need to change your Rear Hanger # 93003-3X on each side to be able to install 2 of the 4-Leaf Double-Eye Springs # e54SR. The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 will give you the necessary new hardware to mount the springs to the frame. I recommend upgrading to the Wet Bolt Kit # K71-358-00 to cut down on noise and provide better articulation of the suspension.
Products Referenced in This Question
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 1-1/4 Inch Tall
- Single Axle
- etrailer
more information >
Continue Researching
- Video: Review of InfiniteRule Locking Pin Shocker Hitch Ball Mount 2 Inch And 2-1/2 Inch Hitch - IR39FR
- Shop: B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black
- Shop: InfiniteRule Locking Pins for Shocker Hitch Ball Mounts for 2" and 2-1/2" Hitches - Qty 3
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Shop: InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Video: Kodiak Tires and Wheels K12WB2 Review
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 1-11/16" Long
- Shop: Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Q&A: Ball Mount with 5 Inch Rise for a Class III Trailer Hitch on a 2015 Nissan Murano
- Video: Redline Tires and Wheels RG03-060 Review
- Video: Curt Weight Distribution Systems Friction Sway Control Review
- Q&A: Recommended Replacement Tire For Coleman Pop Up Camper Trailer With 20.5x80x10 Tires
- Video: Dexter Heavy Duty Suspension Upgrade Kit Review
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Shop: Brake Controller
- Q&A: How Long Does a Friction Sway Control Bar Last
- Q&A: Wheel Stud Solution for Needing Dexter K71-295-00
- Video: Dexter Single Axle Heavy Duty Suspension Installation
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: 26 1 4 leaf spring
- Search Results: q&a
- Search Results: leaf springs
- Q&A: Can Trailer with Slipper Springs be Changed to Double Eye without Changing Hangers
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Shop: Vehicle Seat Covers
- Shop: Floor Mats
- Shop: Tire Chains