Lift Kit For a Tandem Axle Trailer With #12 Dexter Torflex Torsion Axles

Question

Question:

I am looking for a lift kit for my tandom axle #12 dexter torsion axles. I added pictures to show but dint understand the 3 inch bracket that it cant be used in. Could you help me?

asked by: Billy

1

Helpful Expert Reply:

The Torflex Lift Kit # K71-725-02 will allow you to add 3-1/8" of lift on your tandem axle trailer with #12 Dexter Torflex axles. Your axle has mounting holes in the side and top of the flange. You will bolt the lift kit to the side of the mount holes and then use the top mounting holes on the axle.

expert reply by: Bud M

1

#12 Torflex Axle Mounted To Trailer
(click to enlarge)

Answer 1

Your leaf springs are already over the axles, so you have a couple of options. You can go with a lift kit or you can replace your axle hangers. The tandem axle lift kit that will work with your trailer is the Lippert Components Tandem Axle Lift Kit,…

view full answer...

Answer 2

I spoke to my contact at Dexter Axle and he said the reason that the Torflex Lift Kit - Tandem Axle - 3-1/8" Lift #K71-725-02 can not be used on 3" tall brackets is it would make your trailer too tall and it would cause the trailer to not…

view full answer...

Answer 3

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

view full answer...

Answer 4

I have found a solution for you. The Dexter Torflex Lift Kit for Tandem Axle, #K71-725-02, will give you 3-1/8 inches of lift. This lift kit raises the frame of the trailer and is compatible with side-mounted 5,500 -7,000 lbs #12 Torflex axles.

view full answer...

Answer 5

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

view full answer...

Answer 6

We have some lift kit options for torsion axle setups but the fits are very specific. So I will need you to get me the brand and capacity as well as any other info you can get on the axle from the label that's on it and I'll be able to let…

view full answer...

Answer 7

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 8

In order to choose the correct Torflex Lift Kit like part #K71-725-02 you'll need to know the axle model. The above for example is for a model #12. The model can be found on the axle tag sticker located on the axle tube. I have attached a full…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...