Roof Rack Recommendation for 2022 Chevy Equinox with Naked Roof

Question

Question:

What rack do you recommend for a 2022 Chevy equinox with no existing rails or crossbars. Thank you

asked by: Pat

1

Helpful Expert Reply:

For your 2022 Chevy Equinox that has a naked roof the roof rack I would recommend is the Inno Aero Bar Roof Rack part # INXB130-2, # INXS250, # IN43FR. This is a higher quality roof rack that beats it's competitors in price by quite a bit. It's still one of the nicer rack options that's going to fit well, install easy, and be quieter but it just comes in a much better price so I really like it.

expert reply by: Jameson C

1

Answer 1

Yes, the Rhino Rack roof rack part numbers #RRVA137S-2, #RRRLKVA, #DK488 is a fit for your 2022 Chevy Equinox that has a totally flat/naked rooof.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

We have a variety of roof rack solutions for the bare roof on your 2024 Chevy Equinox, and for your application I recommend the Rhino-Rack ROC25: - Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR53TR This uses clamps on your door jambs but it has the…

view full answer...

Answer 4

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 5

The Replacement Air Cylinder #RM-452109-10 is the correct air cylinder for your Roadmaster InvisiBrake Flat Tow Brake System #RM-8700. Do not be confused by the part number as the actual part number is 452109-20(for the Air Cylinder #RM-452109-10)…

view full answer...

Answer 6

There are a couple of things that set the Rhino Rack system using #RRVA150B-2, #RRRCH4, #RRRCP43-BK apart from the Inno system that uses parts #INXB138-2, #INXS350, #INTR154 you're looking at. I'll start out by saying that when it comes to…

view full answer...

Answer 7

Getting the inside dimensions of the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV was no easy task, I started by contacting the manufacturer but they did not have the inside specs on any of the newer boxes like the NX line. So then we had to pull a…

view full answer...

Answer 8

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 9

I have a solution for you. The question that you saw was correct that the Yakima SkyBox 16 #Y07335 will fit the Inno Aero Crossbars on your 2020 Subaru Forester. However, from the photos you provided, one of the mounts doesn't look like it's…

view full answer...

Answer 10

The Inno Box 2020 Rooftop Cargo Box #IN86FR will fit as long as you have the required 24"-39" crossbar spread. You will need to measure to be sure. Also yes, this will fit on the Inno Aero Crossbars #INXB130-2.

view full answer...

Answer 11

I recommend going with the largest crossbar available so that you have as much room as possible for your cargo. A nice large setup that fits your 2012 Honda Accord Sedan is the Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2…

view full answer...

Answer 12

The Yakima SkyBox NX 16 Rooftop Cargo Carrier, #Y95AV, will fit on a vehicle with a crossbar spread between 24 to 36 inches and a maximum crossbar dimensions 3-1/2 x 1-11/16 inches. You will need to check your crossbar spread and the roof line…

view full answer...