Differences Between Compatible BullRing Stake Pocket D-Rings For A 2015 Ford F-350

Question

Question:

What is the difference between the following part numbers? BU25FR BU28FR BU32FR BU73FR I have a 2015 F-350 Crew Cab, 8foot bed, 60/40 split rear bench

asked by: Jeff K

0

Expert Reply:

Each BullRing Stake Pocket D-Ring you have listed have very specific fitments with the only other differences being that the # BU73FR has a chrome finish and # BU28FR is going to sit a bit more flush to the bedrails than the others. For your 2015 Ford F-350 each of these options will fit, but the best option in my opinion is going to be the # BU28FR since it's the only flush mount option.

expert reply by: Kevin C

0

Answer 1

An offset stake pocket on your 2021 Ford F-150 has a stake pocket that is biased slightly forward or rearward, not centered. On your vehicle, only the front and middle stake pockets would be offset on your 2021 Ford F-150. If your tie-down anchors…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes we do carry the B and W gooseneck ball and safety chain loop kit part #BWGNXA2062 that you are looking for. This does fit your 2022 Ram 2500 with the OEM pucks.

view full answer...

Answer 7

When it comes to higher towing capacities and hitch extensions the Torklift extensions are the only way to go like with the part #TLE1536. So to use this with your 2021 Ram 3500 you would need the Torklift hitch part #TLD1111-30 which fits underneath…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Differences Between Compatible BullRing Stake Pocket D-Rings For A 2015 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching