BullRing Stake Pocket D-Rings - Retractable - Flush Mount - Qty 6

Video Transcript for Review of BullRing Truck Bed Tie Downs - Flush Fit Retractable Anchor For Stake Pocket - BU28FR

Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these bull ring, flush fit, retractable tie down anchors for your truck, bed stake pockets. These heavy duty anchors attached to your truck, bed stake pockets. And they're gonna give you tie-down points to secure your load. They're gonna work with your S hook and J hook connections on your straps, and you are going to receive a set of two for your rear stake pockets, and then a set of four for your front and middle stake pockets.

This is going to fit various years and models of the Ford F series trucks. To confirm that these are gonna work for your truck. Take advantage of our vehicle fit guide here at etrailer.com. Input the year make and model of your truck. And our fit guide will let you know if this set will work for you, or if we have another set that will work for you.

Now while the factory anchor points are inside the bed, where they can be hard to reach these retractable anchor points are going to install into the stake pockets on top of your bed rails. Once you have these installed they're gonna be very simple to use. You simply pop the anchor ring up just like that. When you want to use them to secure a load. And then when you are done, you just push them down firmly and they are flush and completely out of the way.

So again, let me show you just how easy these are to use. Just pull up this ring firmly. You hear that pop or that snap. And that means that it is secured in place. This is not going to accidentally slip down.

When you are using this, it's going to stay up the entire time that you need it. And then when you're done and you don't need that ring sticking out anymore and you want it out of the way push it down and it's outta your way. Very simple to use, very easy, very convenient as well. Now, this flush fit is compatible with most of your Tunnel covers and these anchors have a weight capacity of a thousand pounds. The rings are constructed of stainless steel so they're gonna resist rust and corrosion. And this bottom part of the body is constructed of nylon. Now these are going to match the grain and color of your Ford. Bed rails that top plastic cover is gonna match that in such a way that they're gonna look like they're from the factory. So it's gonna give you that nice factory look. Now insulation is gonna be very quick and easy and it's gonna require nothing more than your Phillips head screwdriver. And to install these you would just remove the Ford pop out stake pocket cover and then you would use your Phillips head screwdriver and loosen the two screws here at the top of the anchor. And when you loosen them then you're just gonna go ahead and remove the screws. And for our purposes, I went ahead and loosened the screws here in this anchor and then holding the top black cover here. You're going to let the steel plate and bracket drop down so it can hang freely. You are not going to have to worry about that plate and bracket slipping off of this ring to where it could potentially get lost in your stake pocket because it is permanently attached to the bottom of this ring. So it's gonna hang freely. And then you're just gonna guide the anchor into the hole of your stake pocket from probably the side of your bed. You're gonna have to probably put this in at an angle and then once it's in that pocket, then you're just gonna pull up and catch the lower bracket on the truck sheet metal. And once you've done that, you're just gonna then hold the ring and allow the cover to drop into place. And then just go ahead and reinsert your screws and then go ahead and tighten them. And you just want to hand tighten these screws. You wanna be sure that you don't over tighten them. And if the plastic rail cap begins to bend in or buckle, that means that you're over tightening them. So you wanna be sure that you don't over tighten them. These do have a lifetime warranty. And again, with this, you are gonna get a set of six but if you don't need this many and you think four will do you just fine. We also carry a set of four. I am including our item number on your screen for that set of four. If you would like to check that out just put our item number in the search field of our website here at etrailer.com. And it'll take you to that set of four. So I'm a big fan of these anchor tie downs and I really like how they seem to be very well built. They're very heavy duty. And I appreciate just how easy these are to pull that ring up when you need it, it's gonna hold securely in place. Then when you don't, you push it down, it's out of the way. And I'm probably even more impressed with how easy these are going to be to install. I would say probably indefinitely under half an hour you'll have a complete set of six installed in your bed rails of your truck, and you'll be ready to go. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..