Recommended Union Tee to Inflate Two Air Lift Air Bags w/ One Valve Stem

Question

Question:

im looking to purchace the air lift 5000 and the stainless line kit, is there a splitter i could get to put in line so the bags will fill evenly

asked by: Tj

0

Expert Reply:

You can T off the lines on the Air Lift LoadLifter 5000 item # AL57365 so you only have one inflation valve. You will want to use a union tee like item # F3025-1. This will allow you to splice into the rubber line that comes with the Air Lift Upgrade Kit item # AL52300.

The Air Lift LoadLifter 5000 Air Springs item # AL57365 are confirmed to fit your 2014 Ram 1500. I have linked a couple of installation videos below to help you get these parts set up.

expert reply by: Jerred H

0

Answer 1

To replace the hose on your Titan's Air Lift Kit item #AL88229 you will need the Replacement Air Line Kit for Air Lift LoadLifter 5000, LoadLifter 5000 Ultimate, and Ride Control item #AL20086. This includes a 16' line with threaded…

view full answer...

Answer 2

The No-Drill Mount #18140 is the bracket you saw used in the photo for the Air Lift Upgrade Kit #AL52300 for the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ on your 2022 Toyota Tundra. The holes in the mount were drilled out larger to…

view full answer...

Answer 3

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I highly recommend going with the Air Lift LoadLifter 5000 Air Helper Springs #AL49DQ over their Ride Control system for your 2023 Toyota Tacoma 4WD because they not only offer more support, but they also have a better construction so they'll…

view full answer...

Answer 11

For your 2015 GMC Sierra 3500 Denali DRW 4x4, I recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part #F2709 over the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57538 for two reasons. The first reason is…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...