Replacement Air Line for Air Lift 5000 Air Bag Kits

Question

Question:

I need a hose replacement kit

asked by: Alden F

0

Expert Reply:

To replace the hose on your Titan's Air Lift Kit item # AL88229 you will need the Replacement Air Line Kit for Air Lift LoadLifter 5000, LoadLifter 5000 Ultimate, and Ride Control item # AL20086. This includes a 16' line with threaded connectors on both sides.

If you are needing to replace both air lines, I recommend using the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs item # AL52300. These are braided air lines which are more durable and provide better protection.

expert reply by: Jerred H

0

Answer 1

The No-Drill Mount #18140 is the bracket you saw used in the photo for the Air Lift Upgrade Kit #AL52300 for the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ on your 2022 Toyota Tundra. The holes in the mount were drilled out larger to…

view full answer...

Answer 2

You can T off the lines on the Air Lift LoadLifter 5000 item #AL57365 so you only have one inflation valve. You will want to use a union tee like item #F3025-1. This will allow you to splice into the rubber line that comes with the Air Lift Upgrade…

view full answer...

Answer 3

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

I highly recommend going with the Air Lift LoadLifter 5000 Air Helper Springs #AL49DQ over their Ride Control system for your 2023 Toyota Tacoma 4WD because they not only offer more support, but they also have a better construction so they'll…

view full answer...

Answer 9

For your 2015 GMC Sierra 3500 Denali DRW 4x4, I recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part #F2709 over the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57538 for two reasons. The first reason is…

view full answer...

Answer 10

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

view full answer...

Answer 11

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

view full answer...