Center Cap and Lug Nuts Recommended Parts for the Americana Aluminum HWT Series S5 Trailer Wheels

Question

Question:

If i purchase Americana Aluminum HWT Series S5 Trailer Wheel AM22330HWTB, what trailer wheel center cap and lug nuts should I purchase?

asked by: John C

1

Helpful Expert Reply:

To choose the correct center cap for the Americana Aluminum wheel # AM22330HWTB wheel that you referenced you will need to choose one that works with a 3.19 inch pilot diameter.

The Excalibur Center Cap that you referenced # 319EZ, indicates that it is intended to work with wheels wit 3.19 inch pilot hole, and will work with the Americana Wheel you referenced.

I have also included a link to the other center caps that are intended for wheels with a 3.19 inch pilot hole for your reference if you would like to choose a different style or material.

For the lug nuts you also have a couple of options. You could either use the Redline Chrome Trailer 1/2 inch lug nuts # 12CLN. These work with 1/2 inch wheel bolts, are 20 TPI (threads per inch) and have the 60 degree conical shape needed to work with the Americana HWT Series S5 wheels. If you would like a longer version, those are available as # 12CLN-L.

expert reply by: Rachael H

1

Answer 1

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 2

On a single axle trailer you will want to have a hanger spacing of around 22-3/4 inches when using the 23-1/8 inch long Double-Eye Spring #e59SR. This will allow that rear shackle to correctly lean away from the axle for proper suspension travel.

view full answer...

Answer 3

Unfortunately we do not have a way to replace the keys without knowing the key number for the lock. If they happened to have written down the key number from the lock then we will be able to get you a replacement. The etrailer Trailer Hitch Receiver…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

Base plate kits are somewhat time consuming but they aren't too terribly long. I once asked our install guy that's been here forever how long to set aside for a base plate kit install and he said a "long afternoon" and you'd be…

view full answer...

Answer 6

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

view full answer...

Answer 7

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 8

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 9

We have toppers that'll work for 2 of your 3 sliders. For your 12 foot 9-1/2 slide, use #LCV000168109 which is designed for slides measuring between 152-157 inches wide. The longest topper we offer is for slides 188-193-3/4 inches, so…

view full answer...

Center Cap and Lug Nuts Recommended Parts for the Americana Aluminum HWT Series S5 Trailer Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching