Wiring Parts Needed to Power 3rd Brake Light on 2020 Toyota Tacoma Topper Shell

Question

Question:

Hello, I’m inquiring if you might have a wiring harness for a 2020 Toyota Tacoma but for a topper shell to tap into the brake light. Thank you!

asked by: Ross C

0

Expert Reply:

We definitely have the wiring parts and connectors to help you out but you will need to do some splicing to accomplish this as there isn't a plug and play type adapter. Here are the parts I recommend:

- 3rd Brake Light Logic Module # PP20-702
- Pollak Complete Assembly 2-Pole Connector # PK12200
- Deka Heat Shrink Butt Connector Kit # DW05744-5
- 18-Gauge 2-Wire Bonded Parallel Conductor Wire # SWC97FR (sold by the foot)

The Logic Modul connects to your turn signals and feeds the brake signal you need for the topper shell on your 2020 Toyota Tacoma. Then you just need the Pollak connectors for a quick-disconnect if you ever take the topper off, the butt connectors for your connections, and then additional 18 gauge wire (if necessary).

This setup does require you to cut into your OEM wiring on your truck to make the connections to the turn signals. You can avoid this by installing the Curt T-Connector # C56349 and then pairing this with the light module and a 4-Way Harness like the Hopkins # HM38138 but this route will be a bit pricier and you'll have to cap off the running light wiring for the Hopkins connector since you won't be using it.

expert reply by: Jon G

0

3rd Brake Light Wiring for 2020 Toyota Tacoma Topper Shell
(click to enlarge)

Answer 1

To convert your current running light to also act as a 3rd brake light on your 2005 Alpenlite Aspen 26RB Travel Trailer you will need a Pacer 3rd Brake Light Logic Module #PP20-702 to wire in your harness. The Hot-Line LED Third Brake Trailer Light…

view full answer...

Answer 2

I have a solution for you, but there is not a plug and play type harness for this application that I'm aware of, so the easiest way is to tap into the tail lights on the truck. In order to power the third brake light on your truck topper via the…

view full answer...

Answer 3

The easiest way to accomplish what you're wanting to do is by using the 3rd Brake Light Logic Module #PP20-702 to isolate that brake signal. Then you can either run your wiring from below your truck or you can use a tee-in connector like the Curt…

view full answer...

Answer 4

It is safe to tow with a hitch extender like the Curt #C45796, but it is important to note that using any type of adapter, including an extender, reduces the weight capacity of your hitch by 50 percent.

view full answer...

Answer 5

What you would want is the part #PP20-702 which you can wire to your trailer wiring 4-way to give you a dedicated stoplight circuit for your cap. The trailer wiring has the turn signals and stoplights wired on the same circuit which is why you would…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...