Roof Rack Recommendation for a 1995 Volvo 960 Wagon Without Factory Roof Rack

Question

Question:

I would like your opinion as to what roof rack assembly should I purchase for the above car. The car did not come with a roof rack.

asked by: Alan B

0

Expert Reply:

Since you say your 1995 Volvo 960 Wagon did not come with a roof rack, I assume it has a bare roof with no side rails. Some wagon models of the 960 came with factory installed side rails that run from front to back on the sides of the roof. I have attached a generic photo showing the difference between a bare roof and factory side rails.

I have attached a link to all of the roof rack options available for your 960 wagon with a bare roof. Of the available options, I recommend the Thule roof rack which consists of the following parts.

60 inch SquareBars, part # TH712500
Rapid Gutter Feet, part # TH65BJ

Thule has confirmed that this roof rack will fit your vehicle and Thule is a reputable roof rack manufacturer that makes quality products. The square crossbars are compatible with most roof mounted accessories. If you were interested in any particular accessories such as a bike rack, ski rack or cargo carrier, feel free to email me and I would be happy to make a specific recommendation for you.

If your vehicle has the factory side rails, then you could go with the Thule Evo raised rail roof rack using the following parts.

47 inch SquareBars, part # TH712200
Evo raised rail feet, part # TH710401

expert reply by: John H

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 8

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 9

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

view full answer...