Does Curt Hitch For 2020 Lexus RX 350 Require Fascia Trimming

Question

Question:

For 2020 Lexus RX350 and part C73DR: Does this hitch involve any cutting on the body the Draw-Tite for my vehicle does, but I would prefer one that requires no body/facia modifications? Does the cross-tube show? If yes, can this hitch be supplied without the stickers on it? Can you provide a picture on a vehicle similar to mine?

asked by: Rick W

0

Expert Reply:

According to the directions, underbody fascia trimming is required for your 2020 Lexus RX 350 for the Curt Trailer Hitch Receiver # C73DR.

The crosstube does not show, but I cannot provide a picture on a vehicle similar to yours. as we haven't done an install.

expert reply by: Kyle S

0

Answer 1

Installing the Draw-Tite Trailer Hitch Receiver #75540 on your 2019 Lexus RX 350 will not require any trimming or cutting on your rear fascia. The trimming you see linked in the installation instructions below is only required on model years after…

view full answer...

Answer 2

We do not have a spec sheet with dimensions of the Draw Tite hitch #75540, as this is a custom fit hitch. The Draw Tite #75540 will fit the following vehicles. 2016 - 2022 Lexus RX 350 excluding F Sport 2016 - 2022 Lexus RX 350 F Sport 2016 - 2021…

view full answer...

Answer 3

I have taken a look at the Draw-Tite Max-Frame Trailer Hitch Receiver item #75540. This hitch is confirmed to fit your 2022 Lexus RX 350 and it does require some minor trimming of the lower portion of the rear trim. I have linked a couple of pictures…

view full answer...

Answer 4

The shipping weight of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75540 is 32 lbs.

view full answer...

Answer 5

Curt does indeed list their #C73DR as a fit for the 2020 Lexus RX350 as long as you do not have the F-Sport version. I have attached installation instructions for you to check out.

view full answer...

Answer 6

We have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C73DR as a confirmed fit for the 2020 Lexus RX350 unless it's an F-Sport model. If you'll be using the hitch for towing, you'll need a few other items to complete…

view full answer...

Answer 7

We haven't received any feedback stating that installing the Curt #C73DR hitch has prevented the hands-free liftgate feature on the Lexus RX350 from working. What usually happens is that the receiver tube of the hitch blocks the sensors from…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Does Curt Hitch For 2020 Lexus RX 350 Require Fascia Trimming

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching