Replacement Rubber Strip for Thule Aero Load Bars on a 2008 Audi Q7

Question

Question:

I have the oem roof rack which is made by Thule, do you know which is the correct rubber replacement strip to use to replace?

asked by: Anthony

0

Expert Reply:

You likely have the Thule Aero load bars which take rubber strip # TH853354407 for 53 inches.

expert reply by: Michael H

0

Answer 1

The Thule crossbar strip cover part #TH853354407 would work to cover your opening that is .45 inches wide. That is the diameter opening it was designed to fit.

view full answer...

Answer 2

You can install the Prodigy P3 part #90195 in your 2017 Audi Q7 but you will need some wiring that you can only get at an Audi dealer. the brake control harness: (qty. 1) #1J0-972-782 housing and (qty. 2) #000-979-228 wire/terminal assemblies. Please…

view full answer...

Answer 3

The Thule Replacement Rubber Strip #TH853354407 referenced in your question is designed to fit the Thule Aero Load Bars. To see if they might fit the channel on your Brightlines Crossbar, you will want to take a couple measurements. This particular…

view full answer...

Answer 4

I may have a solution for you. The Replacement Rubber Strip #TH853354407 is designed to fit into a channel that is 7/16 of an inch wide on the top and 7/8 of an inch wide at the bottom. I have included a diagram that shows these measurements. You can…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

No, I am sorry I can not help you John. The steel cable you're needing isn't available. It connects inside the Brake Buddy Stealth Supplemental Braking System item #HM39530 so Hopkins does not offer a replacement.

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Replacement Rubber Strip for Thule Aero Load Bars on a 2008 Audi Q7

Product Page this Question was Asked From

Continue Researching