Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2014 Ford F-150 with 6-1/2' Bed

Question

Question:

Hello, I want to prep my f150 Ford Supercab with with frame mounted tie downs to hold a light slide in camper. My truck has the 6.5 foot bed. I am looking for the brackets on your website.

asked by: Dallas R

0

Expert Reply:

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2014 Ford F-150 with 6-1/2' Bed is part # TLF2014 for the front and part # TLF3005 for the rear. These would then pair perfectly with the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK which will be used to secure the camper to the tie-downs. This will be everything you need to secure your truck bed camper and an excellent option at that with custom brackets and locking tie-downs for security.

expert reply by: Conner L

0

Answer 1

For a 2014 Ram 2500 with an underbed step and factory installed hitch you would need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLD2127 and Rear #TLD3109, regardless of the bed length. To complete your setup I recommend also…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 4

Hey Mark, thanks for the question, and while we have exactly what you're looking for, it's actually a different part number (the one you mentioned is for a long bed). I went ahead and verified for you the correct SuperHitch for your…

view full answer...

Answer 5

We absolutely have an extension for a 7-way trailer wiring harness with a male and female end. You can choose from a number of different lengths in order to get the size you need. I'll go ahead and list out the extensions by overall length so…

view full answer...

Answer 6

To extend a 7-way 48 inches you'd want the part #TLW6048 which comes with a 7-way male on one side and female on the other. If instead you were looking for 10 feet the part #TLW6510 would be what you'd need. These are the best…

view full answer...

Answer 7

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 8

Timbren rear helper springs #TFR1504D for your 2012 Ford F-150 4x4 will definitely help with the sag you are experiencing when towing your Stealth toy hauler. But when not towing or carrying a load in the truck bed you will likely experience a…

view full answer...

Answer 9

Since the Brophy stake pocket mount tie downs, #TDSF, bolt into place, you would just need to un-bolt them from the truck to remove them for the season. It would be a good idea to then apply some sort of rust prevention where the hardware for the…

view full answer...

Answer 10

For a 2017 Ford F-350 Super Duty DRW, with 8' bed and without board or step underneath truck bed. You have the very cost effective option of the Brophy Clamp On Camper Tie-Downs, #HSWB which are powder coated steel brackets that securely…

view full answer...

Answer 11

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

view full answer...

Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2014 Ford F-150 with 6-1/2' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching