Identifying Valve Extender For Outside Dually Wheel To Bring Tire Valve Where it Can Be Used

Question

Question:

In the video with Randy showing valve stem extenders, he shows one on the outside dually wheel that has a hump then 90s out. Do you sell this? I cannot find it on your website.

asked by: Gary F

0

Expert Reply:

It appears to be one of the 180-Degree Wheel Masters Tire Pressure Valve Extenders # WM8029180 which was then bent back out to accommodate the opening for that wheel. We do also have the 135-Degree Extenders # WM8029135 which may work depending on your exact application.

Kits like the Wheel Masters 4-Hose Inflation Kit # WM8001 are great to get the fill points further out towards the center of the hub and more easily accessible.

expert reply by: Bud M

0

Answer 1

Yes, the Wheel Masters Tire Pressure Valve Extenders #WM80294 will depress the valve core on your valve stem so that you will be able to add and release air through the extension. You can hear in the installation video linked below that when our…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You should not have to remove the Schrader valve on the existing valve stems to install extender set #WM8029180. It is just a simple screw-on installation. The extension will depress the valve in the stems you have now and of course has its own…

view full answer...

Answer 4

As far as finding the air valves for your motorhome tires, from the looks of your tires, you will need to remove the hub. In order to do this, it is best to use a flat-head screwdriver to pry off the cover between the cover the rim itself. The hubs…

view full answer...

Answer 5

Similar to the Wheel Masters Tire Pressure Valve Extenders #WM8029180, you can use the: -Wheel Masters Tire Pressure Valve Extenders #WM8029135. This valve extender has a 135° bend which will be easier to use more bulky or stiff air chucks…

view full answer...

Answer 6

The Wheel Masters Tire Pressure Valve Extenders #WM8029180 do not come with any kind of support or rubber grommet for holding them inside the hand hole. The same is true for the 4" Straight #WM80294. Generally the 180 degree extenders is…

view full answer...

Answer 7

The Wheel Masters Tire Pressure Valve Extenders part #WM8029180 are designed to redirect the valve stems on dually setups for easier use. They simply screw onto the existing valve stems for easy installation. There won't be any…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...