Do Wheel Masters Valve Extenders Come With A Support Or Grommet For Holding Inside Of The Hand Hole?

Question

Question:

do these valve stem extenders need to have support like a rubber grommet to hold them inside the hand hole: Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 Item # WM8029180 Also the same question for the 4inch straight version?

asked by: Bill B

0

Expert Reply:

The Wheel Masters Tire Pressure Valve Extenders # WM8029180 do not come with any kind of support or rubber grommet for holding them inside the hand hole. The same is true for the 4" Straight # WM80294.

Generally the 180 degree extenders is what we recommend for the dually sprinter wheels. As far as the Aloca wheels, it is hard to say for sure what extender you need without seeing the wheels. It completely depends on the location of the valve stem.

expert reply by: Jesse M

0

Answer 1

You should not have to remove the Schrader valve on the existing valve stems to install extender set #WM8029180. It is just a simple screw-on installation. The extension will depress the valve in the stems you have now and of course has its own valve…

view full answer...

Answer 2

Since you have 6 wheels, the TireMinder Smart TPMS for RVs #TPMS-APP-4 that you mentioned will work, however you won't have enough sensors for all six tires. Instead, I recommend going with the: -TireMinder i10 TPMS for RVs and Trailers w/ Signal…

view full answer...

Answer 3

My contact at Lippert was able to give me some information regarding the Tire Linc TPMS #LC37VR. The size of the sensor is fairly small, measuring about 3/4" thick and weighing 11 grams each. The battery life will depend on how much the system…

view full answer...

Answer 4

The Wheel Masters Tire Pressure Valve Extenders part #WM8029180 are designed to redirect the valve stems on dually setups for easier use. They simply screw onto the existing valve stems for easy installation. There won't be any modifications…

view full answer...

Answer 5

It appears to be one of the 180-Degree Wheel Masters Tire Pressure Valve Extenders #WM8029180 which was then bent back out to accommodate the opening for that wheel. We do also have the 135-Degree Extenders #WM8029135 which may work depending on your…

view full answer...

Answer 6

Similar to the Wheel Masters Tire Pressure Valve Extenders #WM8029180, you can use the: -Wheel Masters Tire Pressure Valve Extenders #WM8029135. This valve extender has a 135° bend which will be easier to use more bulky or stiff air chucks…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

view full answer...

Do Wheel Masters Valve Extenders Come With A Support Or Grommet For Holding Inside Of The Hand Hole?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching