Recommended EZ Connector for a 2022 Ford F-150 and a 2018 American Coach Motorhome

Question

Question:

Will this easy 7 connect receptacle work on my 2018 American Coach motorhome. Also, will it work on a 2022 Ford F150 raptor. .

asked by: Bob Z

0

Expert Reply:

The EZ Connector Custom item # 319-R7-06 connects to the same harness that a standard 7-way connector attaches to. If you are just needing to replace a standard 7-way that is on or near your bumper you will want the EZ Connector Custom Vehicle Wiring Harness item # 319-S7-06. You won't need the extra wiring provided by the item # 319-R7-06 unless the new location is farther away or you plan on keeping the standard 7-way.

So long as your 2022 Ford F-150 Raptor came with a 7-Way from the factory you should have no problem using either harness with your truck.

If your 2018 American Coach Motorhome doesn't have a factory 7-Way you will need to use item # 319-R7-05 and hard wire it to your motorhome's wiring harness.

An Adapter item # 319-R7-52 can be used if you have another trailer with a 7-way connector that needs pulled but do not want to change out its harness for the EZ Connector.

expert reply by: Jerred H

0

Answer 1

The EZ Connector Custom Vehicle Wiring Harness #319-S7-06 will plug and play with the factory connector on your 2022 Ford F-450 Super Duty. This will take your factory wiring but will not clip in like your factory connector. I recommend the EZ…

view full answer...

Answer 2

Thanks for the pictures! Since your 2014 Toyota Tacoma has a 7-way connector that is hardwired in you will need to cut the wires from the factory connector and hardwire them to the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal -…

view full answer...

Answer 3

Yes, we do have what you are looking for it is the Pollak Trailer Connector Adapter - 7-Blade Plug to 7-Pole Round Pin - Die-Cast Zinc item #PK12728. This adapter plugs into your 7-way, blade-style, vehicle-end connector to convert it for use with…

view full answer...

Answer 4

When we installed the EZ Connector Magnetic 7-Way #319-R7-02 on a 2012 Ram 1500 just like yours we used the included bracket with the kit and it was an easy no-drill installation. Check out the install video I attached to see how it all comes…

view full answer...

Answer 5

If your 1994 Ford F-150 has a 7-way installed on it already the EZ Connector Magnetic 7-Way Trailer Connectors with Built-in Seal #319-R7-02 will easily plug in line with it once you remove the 7-way from your truck's wiring and then plug…

view full answer...

Answer 6

The EZ Connector Magnetic Extension Cord w/ 7-Way Trailer Connectors #319-S7-26 that you referenced comes with coiled cable. The pictures we have for this are pictures we took when the product showed up in our warehouse. I also attached a review…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...